High Availability Computing Solutions - Take a Look
|
|
|
|
|
          

 
 

Sun MicroSystems

Netra CP2060-500 CompactPCI Board

with SCSI 875 Single Ended PMC Module Installed

and

XCP 2060-TRN I/O Transition Card

with SCSI Connector Module Installed

Specification:

PROCESSOR
500-MHz UltraSPARC IIe with VIS instruction set, binary compatible with SPARC application software

PERFORMANCE
500 MHz:18.7 SPECInt95 with 256 KB cache (estimated)

ARCHITECTURE
Non-system slot and low-end system controller

OS SOFTWARE
Solaris Operating Environment, VxWorks

ADDITIONAL SOFTWARE SUPPORT
Sun Validation Test Suite

CACHE
L2: Integrated 4-way 256 KB cache

MEMORY
512 MB soldered on board

FLASH MEMORY
1 MB on-board boot flash,
4 MB user programmable memory

BUS INTERFACE
  • Compact PCI Bus:  Interface PICMG 2.1 R3.0 compliant
                                      33 MHz at 64 bits
                                      Support for seven additional cPCI devices
  • Connector:  2mm pin and socket
  • Memory read/write:  500 MB/sec. (estimated)
SYSTEM MANAGEMENT
Sun Microcontroller, IPMI interface

HOT-SWAP
Basic, full Hot-Swap support for non-system slot cPCI boards

I/O INTERFACES
  • Two serial, two USB, alarms out, external reset, two Ethernet, PMC
  • Rear (J3):  1 PMC
  • Rear (J4):  No connectors
  • Rear (J5):  Two Ethernet (10/100)TP, two USB ports, I2C bus; CP2060: 2nd PMC
NETWORKING INTERFACES
Two 10/100 MB/sec. autosensing TP (rear panel), TCP/IP

REAR CONNECTORS
  • Two serial, two USB, alarms out, external reset, two Ethernet, PMC
  • Rear (J3):  1 PMC
  • Rear (J4):  No connectors
  • Rear (J5):  Two Ethernet (10/100)TP, two USB ports, I2C bus; CP2060: 2nd PMC
SUPERVISORY
PICMG 2.9 System Management compliant
3-level watchdog timer; local alarm capabilities for power, voltage, thermal; FRU ID

SWITCHES
Momentary reset button/switch, abort button/switch (both buttons are recessed from front panel)

TOD/NVRAM
  • Clock/calendar:    8 KB of NVRAM with removable battery
FRONT PANEL LEDS
One power OK LED, one Hot-Swap LED,one user-defined LED

MECHANICAL DIMENSIONS
233.3 mm (9.2 in.) long, 160.0 mm (6.2 in.) wide, 20.0 mm (.8 in.) high

POWER
  • 20W typical at 500-MHz (est.includes 256 MB memory)
  • Input Power:  3.3, 5, +12, -12v required
ENVIRONMENTAL
  • NEBS Level 3 (GR-63-CORE, GR-1089-CORE)
  • Operating temperature:  0° C to 50° C; 5% to 95% RH
  • Non-operating temperature:  -40° C to 70° C; 5% to 95% RH
  • Cooling:  300 LFM 500MHz
  • Relative humidity:  0%to 95% operational, non-condensing
  • Altitude;  60m below sea level to 4000m above sea level
CPCI CONFORMANCE
PICMG 2.1 cPCI Bus, PICMG 2.1 Hot-Swap, PICMG 2.9 system management specification

REGULATORY CONFORMANCE
FCC Class B, EMI; UL 1950, safety

MTBF
170,000 hours with 256 MB memory

TRANSITION CARD
Passive transition card XCP2060-TRN



ORDERING INFORMATION
Call us for more details and quote.
   Return to Top | Terms & Conditions | Contact Us | Site Map | Company Info | © IBUS Corp. -2007 |